BACK
AUGWL0020-JN03
AUGWL0020-JN03
AUGWL0020-JN03
8" Carbon Pulp Woofer
AUGWL0020-JN03
Category - Woofer
Characteristics - Carbon Pulp Diaphragm
AUGWL0020-JN03
AUGWL0020-JN03
AUGWL0020-JN03

8" Carbon Pulp Woofer

AUGWL0020-JN03

Category - Woofer
Characteristics - Carbon Pulp Diaphragm
AUGWL0020-JN03
AUGWL0020-JN03
AUGWL0020-JN03
AUGWL0020-JN03
AUGWL0020-JN03
AUGWL0020-JN03
Description

This 8 inch Woofer, features 2 inch voice coil, pulp with carbon fiber cone, and ferrite magnet motor system. As for the selection of material, this series of driver uses a new mixed material with pulp and 60% carbon fiber, it can greatly enhance the stiffness of the cone body and control range of the internal damping.

8" Carbon Pulp Woofer

AUGWL0020-JN03

Category - Woofer
Characteristics - Carbon Pulp Diaphragm
Features
  • 8”, Aluminum Die-cast Frame
  • 2” CCAW Voice Coil, Aluminum Former
  • Pulp and Carbon Fiber Cone, Rubber Surround
  • Ferrite Magnet Motor System
  • Conex Spider
Parameters
Size
Fs
Re
Sensitivity
Quality Factor
Rated Power
8 Inch
33 Hz
4 Ohms
90 dB
0.36 Qts
100 W
Description

This 8 inch Woofer, features 2 inch voice coil, pulp with carbon fiber cone, and ferrite magnet motor system. As for the selection of material, this series of driver uses a new mixed material with pulp and 60% carbon fiber, it can greatly enhance the stiffness of the cone body and control range of the internal damping.

Specification Measure Chart Simulation Mechanical Drawing Data Sheet Contact Us
T-S Parameters
Resonance frequency [fs] 33 Hz
Mechanical Q factor [Qms] 2.514
Electrical Q factor [Qes] 0.418
Total Q factor [Qts]  0.358
Force factor [Bl] 6.887 Tm
Mechanical resistance [Rms] 2.345 kg/s
Moving mass [Mms]  28.407 g
Compliance [Cms] 0.817 mm/N
Effective diaph. diameter [D]  167 mm
Effective piston area [Sd] 219.04 cm²
Equivalent volume [Vas] 55.5 l
Sensitivity (2.83V/1m)  90 dB
Ratio Bl/√Re 3.76 N/√W
Ratio fs/Qts 92.2 Hz
Electrical Data
Nominal impedance [Zn]  4 Ω
Minimum impedance [Zmin]  3.9 Ω
Maximum impedance [Zo] 19 Ω
DC resistance [Re] 3.36 Ω
Voice coil inductance [Le]  0.201 mH
Power Handling
100h RMS noise test (IEC 18.4) 100 W
Long-term max power (IEC 18.2) 150 W
Voice Coil & Magnet Data
Voice coil diameter 49.55 mm
Voice coil height 17 mm
Voice coil layers 2
Height of gap 6 mm
Linear excursion ± 5 mm
Max mech. excursion ± 15.5 mm
Unit weight 2.6 kg

 

AUGWL0020-JN03
AUGWL0020-JN03

Contact Us

Our Support Team is available round the clock to assist you in your seach. Contact us and we will respond as soon as we can.

Fields that are required.